防爆温度计(THERMO) 型号:TP9

库号：M214985   查看hh

适用范围：
油罐测量
散装液体
密闭输送
铁路
驳船
油罐卡车

的TP9电路板，使测试结果加.
TP9为电池供电，两节AA电池，可以让机器运行200小时，长时间不用20分钟自动关机.
测试过程中显示屏会通过箭头的的指示，提示使用者温度在上升阶段，下降阶段或者平稳阶段.
机器出现问题，会通过代码显示，提示错误原因

背光照明功能：周围光线太暗的情况下，机器背光灯自动开启
温度转换键：机器有摄氏度和华氏度转换按钮，供客户

测温范围：-40 to +400°F
-40 to +204°C

误差：
±0.2°F from 32 to 200°F
±0.5°F from 200 to 400°F
±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C


2节AA碱性电池寿命约200小时
外壳材料：
不锈钢

探针
304不锈钢

zui尺寸：
10“×4.25”x 6.4“W






The TP9 employs the proven RTD design that has been used in the TP7 and TP8 for many years. A sealed industrial quality overlay provides a user interface that is easy to use with gloves. A stainless steel enclosure protects the circuit board and large LCD from penetration by impact, water and reactive liquids.
The new TP9 circuit board is an evolutionary step up from our highly accurate, reliable and successful TL1 laboratory thermometer. The Power Button’s primary function powers the instrument for intervals of about 20 minutes since the last button was accessed. The Power Button can also be used to conserve power and clear the memory, or to make adjustment while in calibration mode. A simple menu operation is displayed by holding the Function Button, and alternay functions to allow adjustments in the calibration mode. Arrows on the left side of the display show the direction of the temperature reading and whether stability has been reached. At the user’s discretion stabilized temperatures can be logged at numerous liquid levels for a running average and later displayed for the user’s documenting purposes. But this feature never interferes with simply getting an accurate temperature reading.
To endure the environment and be intrinsically safe, the TP 9 is manufactured of materials, which are both immune to petrochemicals and are non-sparking. The enclosure is made of stainless steel. The probe assembly is constructed using non-stick cable and stainless steel sensor components.


Specifications
Maximum Dimensions:
10”L x 4.25”H x 6.4” W


Probe
304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA
Cable Jacket, Coaxial Construction


Enclosure Material:
Stainless Steel
Acetal (Delrin) Probe Holder
Polyvinylchloride Faceplate
Stainless Steel Fasteners

Batteries:
2 AA Alkaline; Battery Life of approximay 200 hours
Battery manufacturer’s battery operating temperatature range -4 to 130°F, -20 to 54°C
Note: Battery may not provide adequate power if ambient temperature is extremely low or high.


Temperature:
Resolution 0.01
Range: -40 to +400°F
-40 to +204°C
Calibrated Accuracy:
±0.2°F from 32 to 200°F
±0.5°F from 200 to 400°F
±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C
4 Point NIST Traceable Report of Test
Long-term drift not to exceed 0.05%/year
Meets API requirements