油水界面探测器(船用)15米 油水界面探测器(船用)15米 1. 本产品使用范围 1.0 Applying scope 探测器的设计、制造及检验符合 GB/T12921-1991《船用油水界面探测器技术条件》及 MEPC5(ⅩⅢ)《油水界面探测器技术条件》 The design, manufacture and testing of this device comply with GB/T12921-1991 《 Technical Conditions of Marine Oil/Water Interface Detector》and MEPC5(ⅩⅢ)《Technical Conditions of Oil-Water Interface Detector》. 2. 产品构成及测量原理 2.0 Product composition and its measuring principle 图 2.1 为 UIT 油水界面探测器的实际产品照片。 Fig.2.1 shows the actual product picture of UIT Oil-Water Interface Detector 3. 技术规格 3.0 Specifications 卷尺长度:15m、30m Steel tape length: 15m or 30m 卷尺规格:公制 Tape graduation: Metric 卷尺刻度:1mm Tape resolution: 1mm 探测头直径:23mm Diameter of probe: 23mm 支撑板到读数口距离:495mm Distance between support plate and reading port: 495mm 低探测液面:6mm Minimum detectable level: 6mm 环境使用温度范围:-25℃—55℃ Ambient temperature range: -25℃ ℃ to 55 探测介质温度范围:-25℃—110℃ Temperature range of medium detected: -25℃ to 110℃ 液面指示方式:声响和 LCD 显示 Indication mode for liquid level:Sounding and LCD display 测量度:5mm Accuracy of level measuring: 5mm 防爆等级:ExiaⅡBT4 Explosion-proof class: ExiaⅡBT4 号:GYB101687X Ex-proof Certificate No.: GYB101687X 防护等级:外壳 IP44 传感器Ⅹ8 Degree of protection: Casing: IP44 Sensor: 8 Ⅹ 电池:1 节 9V-6LR61 型 Battery: 9V , Type 6LR61, 1 pieces parallel 连接:2″甲板阀的 1″快速接头 Connection: 1″quick connector on 2″Deck valve 重量:12.5 kg(含包装箱 8.5kg) Weight: 12.5kg(including packing case 8.5kg) 外形尺寸(高×宽×厚): 595×290×145 Overall dimensions (H×W×T): 595×290×145 箱体尺寸(长×宽×高): 695×385×245 Case dimensions (L ×W×H): 695×385×245 |